How to Plan for Well Installation in Hillsborough County, FL

January 30, 2019 Published by Leave your thoughts

Are you interested in switching to well water at your household? There are a number of different factors you’ll need to consider before you jump right into well installation in Hillsborough County, FL, including getting all the proper permits and figuring out exactly where you’ll install the well.

Let’s take a closer look at the processes you’ll need to follow when installing a well so you can guarantee you’re getting good-quality water and an installation that lasts for the long term.


The first step you should take if you’re looking into getting a well on your property is to check and see if you’re required by your local municipality to get a well permit before you begin drilling your well. This is a very common practice in most local governments, so be sure you go through all necessary steps to get those permits. In some cases, the well installation company will take care of pulling all permits for you, so you might not have to worry about it personally—just make sure this is a service the well company provides.

If you are building a new home, you can ask your home builder about any of the legal requirements for pulling permits for wells. Your builder will generally pull all necessary permits for your property, but it is still important to discuss your well with your builder so they can avoid building in prime well locations.


Once you’ve got the permit information taken care of, you’ll want to figure out exactly where on your property you’ll put your well. You want to make sure you’re not dealing with issues such as a low natural or seasonal water table, or that you’re in an area that could be interfered with by other nearby wells.

Your well must be at least 10 feet from a gas or electric line, and at least 20 feet from tested and approved sewer services. Agricultural chemicals must be stored at least 150 feet away from the well, and if there are any unused wells on your property, the new well should be at least 50 feet away from them. It is also a good idea to make sure any new well you create will be easily accessible in the future for maintenance purposes.

Water presence

You need to be sure there’s enough water in the area for you to actually be able to install a functional well. There should be enough water to meet your needs for everyday use (cooking, bathing, toilets, laundry, dishwashers), seasonal use (lawn irrigation, swimming pools) and fire protection. If the amount of water that comes from your well would not be enough to satisfy these needs, then you may not be able to have a well on your property.

For more information about the various processes and considerations associated with well installation in Hillsborough County, FL, we encourage you to contact the team at Advanced Pump & Well Service today with any questions or concerns—we’ll be happy to provide you with answers!

Categorised in:

Leave a Reply

Your email address will not be published. Required fields are marked *