The Most Common Well Pump Issues in Hillsborough County, FL

March 20, 2019 Published by Leave your thoughts

Deep well pumps are used for lifting water up out of deep wells that have small diameters. Obviously, these pumps play a critical role in your ability to collect and use water on your property. When they begin to malfunction, it is important that you bring out a professional well pump technician to identify and resolve the issue as soon as possible.

Here are just a few examples of some of the most common well pump issues in Hillsborough County, FL that you may experience at some point:

  • Lack of water pressure: A lack of water pressure coming from the water fixtures in your home could manifest itself in the form of weak flow or a total lack of water, depending on the circumstances. The most common causes here are leaks in the pipes or problems with the electrical motor in the pump. If you have burnt fuses or dead circuit breakers, this could also result in no water being pumped because there’s no power going to the pump.
  • Short cycling: Short cycling is a term used in the water pump industry for a deep well pump that rapidly turns itself on and off. Short cycling typically is a result of a loss of air charge in the water tank or a water pressure control switch that has become damaged or defective in some way. The most common cause is a loss of air charge, which you can fix by removing the water from the tank or by using the water tank’s air valve.
  • Defective motor control switch: If you have clogged tubing or burned-out contacts in the motor, this could result in a defective control switch. If this is a problem you have, the motor will either begin to overheat or it could burn out a fuse because of all the extra strain it’s putting on your systems to push water through the plumbing. In some more severe cases, the motor can completely die, resulting in the entire pump needing to be replaced.
  • Constantly running pump: You should not have a pump that’s constantly running—this is a sign that your pump isn’t efficiently taking water out of your well, and must constantly run to keep your home supplied for its water needs. If you notice your pump constantly running, it’s important to call a technician to check it out.

If you’re having these problems, you may be wondering if you’ll need to have your well pump replaced. Before you start replacing anything, though, make sure you have talked to your well water professional, as they’ll be able to assess the situation and determine the best course of action. Sometimes an issue is relatively inexpensive to repair, making that the best option.

If you’re interested in learning more about these common well pump issues in Hillsborough County, FL and the strategies you can take to avoid them and keep your equipment in good operating condition for as long as possible, contact the team at Advanced Pump & Well Service today.

Categorised in:

Leave a Reply

Your email address will not be published. Required fields are marked *