Water Well Pressure Tank Problems
Pressure tank problems in Hillsborough County, FL are not an issue that can be ignored. To keep your pressure tanks in Hillsborough County, FL operating smoothly, it is essential to be aware of potential problems, identify their cause and take action to address them.
Use the following tips to properly maintain your pressure tanks in Hillsborough County, FL. If you have any questions, don’t hesitate to reach out to your local experts who specialize in remedying pressure tank problems in Hillsborough County, FL.
Understand the concern
The first thing to understand is why pressure tank problems in Hillsborough County, FL are a cause for concern. The pressure tank stores the water supply for your property. It ensures that water appears when you turn on a faucet or an appliance. It does the heavy lifting for the submersible pump that is located in your well.
If the pressure tank is experiencing problems, the well pump will have to turn on and off more frequently. It will have to work harder. When this happens, the well pump is more likely to experience problems of its own and deliver a shorter lifespan. Since replacing a well pump is an expensive endeavor, you want to avoid doing this sooner than necessary. By properly maintaining your pressure tanks in Hillsborough County, FL, you can prolong the life of your well pump.
Test your tank
To determine if your pressure tank is operating optimally, perform a pressure tank test. First, locate the pressure gauge on the tank. It’s usually near the bottom and has numbers that increase by fives or tens.
Next, time the tank. Using a handheld timer, calculate how long it takes for the tank to cycle. Ask someone to turn on the cold water at your sink. Start your timer once the pressure gauge hits the low setting and clicks. When the needle hits this point and you hear a click, tell your helper to turn off the water and start your timer. When you hear the click again as the needle reaches its high point, stop your timer.
If the process takes one minute or longer, your tank is probably functioning well. If it takes only 20 or 30 seconds, the bladder inside the tank is probably ruptured, and your tank is running at a fraction of its capacity. This makes your well pump cycle far more than it should, which will cause it to burn out.
Take action
If you discover your tank is not fully functioning, contact a professional as soon as possible. The longer you wait, the more stress your pump will experience. Get the issue taken care of now, so you can save time and money down the road.
Partner with the pros
With 24-hour emergency service and scheduled maintenance calls, Advanced Pump & Well Service is here for all your pressure tank problems in Hillsborough County, FL. We service all makes and models of wells and pumps, so there is no issue we cannot resolve. We are here to serve you with high-quality workmanship. Contact us today to keep your system in top shape.
Categorised in: Pressure Tanks