What Happens When You Experience Pressure Switch Problems with a Well?

April 27, 2021 Published by Leave your thoughts

Have you been running into trouble with the well system on your Tampa, FL property? If there’s very little or no water coming to the house, you could be dealing with pressure switch problems. If you’ve ruled out any problems with other components of the well, here are six potential causes and solutions to the most common issues with a pressure switch.

A switch that won’t turn on

Noticing that your switch won’t turn on? This is one of the most common pressure switch problems affecting well systems in Tampa, FL. In some cases, this might be the result of the tank pressure rising above your switch’s cut-in pressure. Try running water in other areas of your property to reduce the pressure, or gently tap on the pressure gauge. If the issue isn’t resolved, it’s best to call your local well service professionals for assistance.

A switch that won’t turn off

If your switch won’t turn off, you need to cut power right away to keep it from burning out. Have a professional look at the system, checking for any leaks that could be affecting the pressure cutoff.

A switch that won’t turn on or off

When a switch won’t respond to any command, it usually means your well water pump isn’t creating the right amount of pressure. Make sure the pump and the water pressure gauge are in working condition before attempting to diagnose a pressure problem.

Bad connections within the system

The entire well water system must work together in order for the pressure switch to work properly. A malfunction in your switch could be the result of a number of leaks and improper connections with your system, including wrong-sized piping. Contact your local well service expert to do a full inspection of your piping and to look for any signs that the pipe and switch aren’t making a perfect, snug connection.

Electrical problems within the switch

The switch itself might be bad due to electrical problems. Over time, electrical contacts within the switch can degrade—the usual causes are frequent cycling of power to the switch or infiltration of corrosive substances. In some cases, you can file away the affected area to restore good electrical contacts, but this is only a temporary fix. Eventually, you’ll need to have the switch replaced.

Clogging in the pressure sensor

The pressure sensor in a switch can become clogged if there’s a high sediment or mineral content in your water. You’ll need to clean the tube that connects the switch to the water supply and the bottom of the switch itself, but in most cases it’s best to simply have the switch replaced.

Running water is essential to your everyday life at home, and problems with your pressure switch can suddenly make the taps in your Tampa, FL property go dry. It’s never a good idea to try to fix a problem with your well system on your own—always rely on assistance from an experienced professional. Contact Advanced Pump & Well Service today to repair the pressure switch and other vital components of your well.

Categorised in:

Leave a Reply

Your email address will not be published. Required fields are marked *