What to Do if Your Water Stops Flowing

November 25, 2021 Published by Leave your thoughts

Turning on your faucet only to find that there’s no water available is alarming. When your household or business uses well water, there could be a number of potential culprits. While you might need emergency well pump repair in Brooksville, FL, there may be some other issues causing the water shortage.

Here’s a closer look at what you need to do when your water stops flowing:

  • Check the power: First, check the power to your well pump. The breaker may have tripped, or you could be experiencing other power-related problems with the well pump. Flip the breaker back on, or replace a blown-out fuse to see if that fixes the problem. If you still have no water, flip the breaker back off, and call a well repair contractor.
  • Check the pressure tank: There could also be an issue with the pressure tank. The pressure tank’s job is to take the water that the pump pulls up and pressurize it, so it’s ready to go when you turn on the faucet. As the water is pushed into the pressure tank, it’s compressed against an air bladder. When the air bladder breaks, the power is shut off, the tank rusts or becomes waterlogged, and it won’t work properly. If you see anything abnormal around the pressure tank, this could be the cause of the problem.
  • Look for signs of plumbing failure: Sometimes your well pump is working fine, but water isn’t flowing to the faucets due to plumbing failure. Look for signs of water damage and leaking around your property. There could be cracks in the plumbing, clogs or other issues that make it difficult for the water to travel properly. Call a well contractor and plumber to make sure that you have all of your bases covered.
  • Call a professional: No matter what you find—or don’t find—around your property, make sure that you call a professional as soon as possible. You need running water, and until the source of the problem is identified and repaired, you’ll be without water. Luckily, most well contractors and plumbers offer emergency services for just this kind of situation.

When you call for emergency well repair in Brooksville, FL, your well contractor will come out and check your well components for problems. If the issue can be repaired on the spot, they’ll go ahead and fix it so that you have running water; however, in some cases, you may need to replace your well pump or pressure tank. If that’s the case, most well contractors can help you get an appropriately-sized well pump for your well and water needs.

On a final note, this is a good reminder that well pumps need preventative maintenance, just like all machinery. To ensure that your well pump doesn’t go out at an inconvenient time, talk to your well contractor about scheduling regular preventative maintenance.

For emergency well pump repair in Brooksville, FL, reach out to the team at Advanced Well & Pump Service today.

Categorised in:

Leave a Reply

Your email address will not be published. Required fields are marked *