Well Pump Troubleshooting Tips

December 9, 2021 Published by Leave your thoughts

When there’s a problem with your well pump, it stops everything in your household or business. Whether you need emergency well repair in Brooksville, FL or it’s a simple problem you can fix on your own, everything grinds to a halt until your water is running freely once more.

Here are some of the things you can check to ensure that your well pump is operating properly:

  • Is your power off? First, check that the well pump is receiving power. The breaker may have flipped, or a fuse may have blown out. If that’s the case, replace the fuse, or flip the breaker back on. If the well pump comes back on, then your problem is likely solved. If not, keep reading to troubleshoot the issues, or call a professional for help.
  • Is the water table low? If your area is experiencing a drought, the water table may be too low for your pump to pull up water. Solutions to this problem include drilling deeper into your existing well or drilling an entirely new well. Check the drought conditions in your specific location to see if this could be an area of concern.
  • Is the pump the right size? If your pump is too big or too small for your particular well, it may not be able to pull up enough water to function properly. Your pump should be sized to your home’s or business’s size and plumbing system. This may require a professional to diagnose.
  • Is your pump overworked? Similarly, your pressure tank needs to be sized appropriately to your home’s or business’s size and plumbing system. This will take some of the burden off the pump, too, which will help extend the pump’s overall lifespan.
  • Is there sediment in the water? Sometimes your water will appear and smell dirty because of harmless minerals in the water, but if you notice dirt or sediment coming from the tap, that’s a sign that there’s something wrong with the well pump or water level. Call a professional right away.
  • Is the faucet spitting? If your faucet seems to be spitting, that means there’s air in your plumbing. This could be due to a problem with the pump, or there may be a crack in the pipes that allows air in.

These are just a few of the most common issues that can occur when you draw water from a well. Generally, keeping up on preventative maintenance will ensure that the mechanical parts of your well operate properly for as long as possible; however, sometimes the problem lies with the plumbing or the water table itself.

If you’re not sure where your well problems are originating from, it’s important to call a professional to get to the bottom of the issue. Advanced Pump & Well Service can help with emergency well repair in Brooksville, FL. Whether you have an emergency or just want to troubleshoot, we can help restore your water. Contact us today to schedule a service appointment.

Categorised in:

Leave a Reply

Your email address will not be published. Required fields are marked *